Power networks CITEL DAC, DUT, DS, DDC, PAC, MSB, SFD, etc.

Surge protection devices CITEL Type 1+2 and Type 1+2+3 they are powerful devices designed for installation at the input of AC systems equipped with an external lightning protection system. They are necessary to protect sensitive equipment connected to the AC network from the direct and indirect effects of lightning discharges. Depending on various national electrotechnical rules and regulations, these USIPS may be recommendatory or mandatory.

Surge protection devices CITEL Type 2 are designed to be installed at the beginning of a low-voltage system or next to sensitive equipment to protect against transient and induced overvoltages associated with a low-voltage network. Surge protection devices are recommended or, in some cases, mandatory devices for some systems, especially when these systems are located in an area with a high density of lightning discharges (Ng>2.5) or when they are powered by overhead lines.

AC Protection devices Type 1+2+3

Models: DAC1-13VGS, DS250VG, DUT250VG, DACN1-25VGS-760, ZPAC1.

AC protection devices Type 1+2

Models: DAC1-13S, DS250E, DS500E, DS1000G, PAC1.

AC protection devices Type 2

Models: DAC80S, DAC50S, DACF25S, DS-HF, DS40HF, PAC, DAC50S Wind Turbine, DAC40CS Single Phase Series (UZIP Type 2), DAC40CS 3-Phase Series (UZIP Type 2).

AC protection devices Type 2 (or 3)

Models: DAC50VGS, DACF15S, DACN10S Imax 10 kA, DAC15CS 3-Phase Series (ULTRASOUND Type 2+3), DAC15CS Single Phase Series (Ultrasound Type 2+3).

UZIP Type 1 and Type 2 for the DC network

Models: DDC30S, DS250-DC, DS70R-DC.

DC protection devices Type 2

Models: DDCCS, DDC50S-21Y, DS210-DC, DS230S-DC, DS40-DC, DS220-DC.

AC protection devices with wired connection

Models: MSB10, MSB6.

Accessories

Models: SFD1-25 (Disconnectors for SPD Type 1 AC Iimp 25 kA), SFD1-13 (Disconnectors for SPD Type 1 AC Iimp 12.5 kA), LSCM-D, DSDT, DSH.